Python Enhancement Proposals

PEP 203 – Augmented Assignments

PEP
203
Title
Augmented Assignments
Author
thomas at python.org (Thomas Wouters)
Status
Final
Type
Standards Track
Created
13-Jul-2000
Python-Version
2.0
Post-History
14-Aug-2000

Contents

Introduction

This PEP describes the augmented assignment proposal for Python 2.0. This PEP tracks the status and ownership of this feature, slated for introduction in Python 2.0. It contains a description of the feature and outlines changes necessary to support the feature. This PEP summarizes discussions held in mailing list forums [1], and provides URLs for further information where appropriate. The CVS revision history of this file contains the definitive historical record.

Proposed Semantics

The proposed patch that adds augmented assignment to Python introduces the following new operators:

+= -= *= /= %= **= <<= >>= &= ^= |=

They implement the same operator as their normal binary form, except that the operation is done in-place when the left-hand side object supports it, and that the left-hand side is only evaluated once.

They truly behave as augmented assignment, in that they perform all of the normal load and store operations, in addition to the binary operation they are intended to do. So, given the expression:

x += y

The object x is loaded, then y is added to it, and the resulting object is stored back in the original place. The precise action performed on the two arguments depends on the type of x, and possibly of y.

The idea behind augmented assignment in Python is that it isn’t just an easier way to write the common practice of storing the result of a binary operation in its left-hand operand, but also a way for the left-hand operand in question to know that it should operate on itself, rather than creating a modified copy of itself.

To make this possible, a number of new hooks are added to Python classes and C extension types, which are called when the object in question is used as the left hand side of an augmented assignment operation. If the class or type does not implement the in-place hooks, the normal hooks for the particular binary operation are used.

So, given an instance object x, the expression:

x += y

tries to call x.__iadd__(y), which is the in-place variant of __add__ . If __iadd__ is not present, x.__add__(y) is attempted, and finally y.__radd__(x) if __add__ is missing too. There is no right-hand-side variant of __iadd__, because that would require for y to know how to in-place modify x, which is unsafe to say the least. The __iadd__ hook should behave similar to __add__, returning the result of the operation (which could be self) which is to be assigned to the variable x.

For C extension types, the hooks are members of the PyNumberMethods and PySequenceMethods structures. Some special semantics apply to make the use of these methods, and the mixing of Python instance objects and C types, as unsurprising as possible.

In the generic case of x <augop> y (or a similar case using the PyNumber_InPlace API functions) the principal object being operated on is x. This differs from normal binary operations, where x and y could be considered co-operating, because unlike in binary operations, the operands in an in-place operation cannot be swapped. However, in-place operations do fall back to normal binary operations when in-place modification is not supported, resulting in the following rules:

  • If the left-hand object (x) is an instance object, and it has a __coerce__ method, call that function with y as the argument. If coercion succeeds, and the resulting left-hand object is a different object than x, stop processing it as in-place and call the appropriate function for the normal binary operation, with the coerced x and y as arguments. The result of the operation is whatever that function returns.

    If coercion does not yield a different object for x, or x does not define a __coerce__ method, and x has the appropriate __ihook__ for this operation, call that method with y as the argument, and the result of the operation is whatever that method returns.

  • Otherwise, if the left-hand object is not an instance object, but its type does define the in-place function for this operation, call that function with x and y as the arguments, and the result of the operation is whatever that function returns.

    Note that no coercion on either x or y is done in this case, and it’s perfectly valid for a C type to receive an instance object as the second argument; that is something that cannot happen with normal binary operations.

  • Otherwise, process it exactly as a normal binary operation (not in-place), including argument coercion. In short, if either argument is an instance object, resolve the operation through __coerce__, __hook__ and __rhook__. Otherwise, both objects are C types, and they are coerced and passed to the appropriate function.
  • If no way to process the operation can be found, raise a TypeError with an error message specific to the operation.
  • Some special casing exists to account for the case of + and *, which have a special meaning for sequences: for +, sequence concatenation, no coercion what so ever is done if a C type defines sq_concat or sq_inplace_concat. For *, sequence repeating, y is converted to a C integer before calling either sq_inplace_repeat and sq_repeat. This is done even if y is an instance, though not if x is an instance.

The in-place function should always return a new reference, either to the old x object if the operation was indeed performed in-place, or to a new object.

Rationale

There are two main reasons for adding this feature to Python: simplicity of expression, and support for in-place operations. The end result is a tradeoff between simplicity of syntax and simplicity of expression; like most new features, augmented assignment doesn’t add anything that was previously impossible. It merely makes these things easier to do.

Adding augmented assignment will make Python’s syntax more complex. Instead of a single assignment operation, there are now twelve assignment operations, eleven of which also perform a binary operation. However, these eleven new forms of assignment are easy to understand as the coupling between assignment and the binary operation, and they require no large conceptual leap to understand. Furthermore, languages that do have augmented assignment have shown that they are a popular, much used feature. Expressions of the form:

<x> = <x> <operator> <y>

are common enough in those languages to make the extra syntax worthwhile, and Python does not have significantly fewer of those expressions. Quite the opposite, in fact, since in Python you can also concatenate lists with a binary operator, something that is done quite frequently. Writing the above expression as:

<x> <operator>= <y>

is both more readable and less error prone, because it is instantly obvious to the reader that it is <x> that is being changed, and not <x> that is being replaced by something almost, but not quite, entirely unlike <x>.

The new in-place operations are especially useful to matrix calculation and other applications that require large objects. In order to efficiently deal with the available program memory, such packages cannot blindly use the current binary operations. Because these operations always create a new object, adding a single item to an existing (large) object would result in copying the entire object (which may cause the application to run out of memory), add the single item, and then possibly delete the original object, depending on reference count.

To work around this problem, the packages currently have to use methods or functions to modify an object in-place, which is definitely less readable than an augmented assignment expression. Augmented assignment won’t solve all the problems for these packages, since some operations cannot be expressed in the limited set of binary operators to start with, but it is a start. PEP 211 is looking at adding new operators.

New methods

The proposed implementation adds the following 11 possible hooks which Python classes can implement to overload the augmented assignment operations:

__iadd__
__isub__
__imul__
__idiv__
__imod__
__ipow__
__ilshift__
__irshift__
__iand__
__ixor__
__ior__

The i in __iadd__ stands for in-place.

For C extension types, the following struct members are added.

To PyNumberMethods:

binaryfunc nb_inplace_add;
binaryfunc nb_inplace_subtract;
binaryfunc nb_inplace_multiply;
binaryfunc nb_inplace_divide;
binaryfunc nb_inplace_remainder;
binaryfunc nb_inplace_power;
binaryfunc nb_inplace_lshift;
binaryfunc nb_inplace_rshift;
binaryfunc nb_inplace_and;
binaryfunc nb_inplace_xor;
binaryfunc nb_inplace_or;

To PySequenceMethods:

binaryfunc sq_inplace_concat;
intargfunc sq_inplace_repeat;

In order to keep binary compatibility, the tp_flags TypeObject member is used to determine whether the TypeObject in question has allocated room for these slots. Until a clean break in binary compatibility is made (which may or may not happen before 2.0) code that wants to use one of the new struct members must first check that they are available with the PyType_HasFeature() macro:

if (PyType_HasFeature(x->ob_type, Py_TPFLAGS_HAVE_INPLACE_OPS) &&
    x->ob_type->tp_as_number && x->ob_type->tp_as_number->nb_inplace_add) {
        /* ... */

This check must be made even before testing the method slots for NULL values! The macro only tests whether the slots are available, not whether they are filled with methods or not.

Implementation

The current implementation of augmented assignment [2] adds, in addition to the methods and slots already covered, 13 new bytecodes and 13 new API functions.

The API functions are simply in-place versions of the current binary-operation API functions:

PyNumber_InPlaceAdd(PyObject *o1, PyObject *o2);
PyNumber_InPlaceSubtract(PyObject *o1, PyObject *o2);
PyNumber_InPlaceMultiply(PyObject *o1, PyObject *o2);
PyNumber_InPlaceDivide(PyObject *o1, PyObject *o2);
PyNumber_InPlaceRemainder(PyObject *o1, PyObject *o2);
PyNumber_InPlacePower(PyObject *o1, PyObject *o2);
PyNumber_InPlaceLshift(PyObject *o1, PyObject *o2);
PyNumber_InPlaceRshift(PyObject *o1, PyObject *o2);
PyNumber_InPlaceAnd(PyObject *o1, PyObject *o2);
PyNumber_InPlaceXor(PyObject *o1, PyObject *o2);
PyNumber_InPlaceOr(PyObject *o1, PyObject *o2);
PySequence_InPlaceConcat(PyObject *o1, PyObject *o2);
PySequence_InPlaceRepeat(PyObject *o, int count);

They call either the Python class hooks (if either of the objects is a Python class instance) or the C type’s number or sequence methods.

The new bytecodes are:

INPLACE_ADD
INPLACE_SUBTRACT
INPLACE_MULTIPLY
INPLACE_DIVIDE
INPLACE_REMAINDER
INPLACE_POWER
INPLACE_LEFTSHIFT
INPLACE_RIGHTSHIFT
INPLACE_AND
INPLACE_XOR
INPLACE_OR
ROT_FOUR
DUP_TOPX

The INPLACE_* bytecodes mirror the BINARY_* bytecodes, except that they are implemented as calls to the InPlace API functions. The other two bytecodes are utility bytecodes: ROT_FOUR behaves like ROT_THREE except that the four topmost stack items are rotated.

DUP_TOPX is a bytecode that takes a single argument, which should be an integer between 1 and 5 (inclusive) which is the number of items to duplicate in one block. Given a stack like this (where the right side of the list is the top of the stack):

[1, 2, 3, 4, 5]

DUP_TOPX 3 would duplicate the top 3 items, resulting in this stack:

[1, 2, 3, 4, 5, 3, 4, 5]

DUP_TOPX with an argument of 1 is the same as DUP_TOP. The limit of 5 is purely an implementation limit . The implementation of augmented assignment requires only DUP_TOPX with an argument of 2 and 3, and could do without this new opcode at the cost of a fair number of DUP_TOP and ROT_*.

Open Issues

The PyNumber_InPlace API is only a subset of the normal PyNumber API: only those functions that are required to support the augmented assignment syntax are included. If other in-place API functions are needed, they can be added later.

The DUP_TOPX bytecode is a conveniency bytecode, and is not actually necessary. It should be considered whether this bytecode is worth having. There seems to be no other possible use for this bytecode at this time.

References

[1]
http://www.python.org/pipermail/python-list/2000-June/059556.html
[2]
http://sourceforge.net/patch?func=detailpatch&patch_id=100699&group_id=5470

Source: https://github.com/python-discord/peps/blob/main/pep-0203.txt

Last modified: 2022-01-21 11:03:51 GMT