Python Enhancement Proposals

PEP 659 – Specializing Adaptive Interpreter

Specializing Adaptive Interpreter
Mark Shannon <mark at>



In order to perform well, virtual machines for dynamic languages must specialize the code that they execute to the types and values in the program being run. This specialization is often associated with “JIT” compilers, but is beneficial even without machine code generation.

A specializing, adaptive interpreter is one that speculatively specializes on the types or values it is currently operating on, and adapts to changes in those types and values.

Specialization gives us improved performance, and adaptation allows the interpreter to rapidly change when the pattern of usage in a program alters, limiting the amount of additional work caused by mis-specialization.

This PEP proposes using a specializing, adaptive interpreter that specializes code aggressively, but over a very small region, and is able to adjust to mis-specialization rapidly and at low cost.

Adding a specializing, adaptive interpreter to CPython will bring significant performance improvements. It is hard to come up with meaningful numbers, as it depends very much on the benchmarks and on work that has not yet happened. Extensive experimentation suggests speedups of up to 50%. Even if the speedup were only 25%, this would still be a worthwhile enhancement.


Python is widely acknowledged as slow. Whilst Python will never attain the performance of low-level languages like C, Fortran, or even Java, we would like it to be competitive with fast implementations of scripting languages, like V8 for Javascript or luajit for lua. Specifically, we want to achieve these performance goals with CPython to benefit all users of Python including those unable to use PyPy or other alternative virtual machines.

Achieving these performance goals is a long way off, and will require a lot of engineering effort, but we can make a significant step towards those goals by speeding up the interpreter. Both academic research and practical implementations have shown that a fast interpreter is a key part of a fast virtual machine.

Typical optimizations for virtual machines are expensive, so a long “warm up” time is required to gain confidence that the cost of optimization is justified. In order to get speed-ups rapidly, without noticeable warmup times, the VM should speculate that specialization is justified even after a few executions of a function. To do that effectively, the interpreter must be able to optimize and de-optimize continually and very cheaply.

By using adaptive and speculative specialization at the granularity of individual virtual machine instructions, we get a faster interpreter that also generates profiling information for more sophisticated optimizations in the future.


There are many practical ways to speed-up a virtual machine for a dynamic language. However, specialization is the most important, both in itself and as an enabler of other optimizations. Therefore it makes sense to focus our efforts on specialization first, if we want to improve the performance of CPython.

Specialization is typically done in the context of a JIT compiler, but research shows specialization in an interpreter can boost performance significantly, even outperforming a naive compiler [1].

There have been several ways of doing this proposed in the academic literature, but most attempt to optimize regions larger than a single bytecode [1] [2]. Using larger regions than a single instruction requires code to handle de-optimization in the middle of a region. Specialization at the level of individual bytecodes makes de-optimization trivial, as it cannot occur in the middle of a region.

By speculatively specializing individual bytecodes, we can gain significant performance improvements without anything but the most local, and trivial to implement, de-optimizations.

The closest approach to this PEP in the literature is “Inline Caching meets Quickening” [3]. This PEP has the advantages of inline caching, but adds the ability to quickly de-optimize making the performance more robust in cases where specialization fails or is not stable.


The speedup from specialization is hard to determine, as many specializations depend on other optimizations. Speedups seem to be in the range 10% - 60%.

  • Most of the speedup comes directly from specialization. The largest contributors are speedups to attribute lookup, global variables, and calls.
  • A small, but useful, fraction is from from improved dispatch such as super-instructions and other optimizations enabled by quickening.



Any instruction that would benefit from specialization will be replaced by an “adaptive” form of that instruction. When executed, the adaptive instructions will specialize themselves in response to the types and values that they see. This process is known as “quickening”.

Once an instruction in a code object has executed enough times, that instruction will be “specialized” by replacing it with a new instruction that is expected to execute faster for that operation.


Quickening is the process of replacing slow instructions with faster variants.

Quickened code has number of advantages over immutable bytecode:

  • It can be changed at runtime
  • It can use super-instructions that span lines and take multiple operands.
  • It does not need to handle tracing as it can fallback to the original bytecode for that.

In order that tracing can be supported, the quickened instruction format should match the immutable, user visible, bytecode format: 16-bit instructions of 8-bit opcode followed by 8-bit operand.

Adaptive instructions

Each instruction that would benefit from specialization is replaced by an adaptive version during quickening. For example, the LOAD_ATTR instruction would be replaced with LOAD_ATTR_ADAPTIVE.

Each adaptive instruction periodically attempts to specialize itself.


CPython bytecode contains many instructions that represent high-level operations, and would benefit from specialization. Examples include CALL, LOAD_ATTR, LOAD_GLOBAL and BINARY_ADD.

By introducing a “family” of specialized instructions for each of these instructions allows effective specialization, since each new instruction is specialized to a single task. Each family will include an “adaptive” instruction, that maintains a counter and attempts to specialize itself when that counter reaches zero.

Each family will also include one or more specialized instructions that perform the equivalent of the generic operation much faster provided their inputs are as expected. Each specialized instruction will maintain a saturating counter which will be incremented whenever the inputs are as expected. Should the inputs not be as expected, the counter will be decremented and the generic operation will be performed. If the counter reaches the minimum value, the instruction is de-optimized by simply replacing its opcode with the adaptive version.

Ancillary data

Most families of specialized instructions will require more information than can fit in an 8-bit operand. To do this, a number of 16 bit entries immediately following the instruction are used to store this data. This is a form of inline cache, an “inline data cache”. Unspecialized, or adaptive, instructions will use the first entry of this cache as a counter, and simply skip over the others.

Example families of instructions


The LOAD_ATTR loads the named attribute of the object on top of the stack, then replaces the object on top of the stack with the attribute.

This is an obvious candidate for specialization. Attributes might belong to a normal instance, a class, a module, or one of many other special cases.

LOAD_ATTR would initially be quickened to LOAD_ATTR_ADAPTIVE which would track how often it is executed, and call the _Py_Specialize_LoadAttr internal function when executed enough times, or jump to the original LOAD_ATTR instruction to perform the load. When optimizing, the kind of the attribute would be examined, and if a suitable specialized instruction was found, it would replace LOAD_ATTR_ADAPTIVE in place.

Specialization for LOAD_ATTR might include:

  • LOAD_ATTR_INSTANCE_VALUE A common case where the attribute is stored in the object’s value array, and not shadowed by an overriding descriptor.
  • LOAD_ATTR_MODULE Load an attribute from a module.
  • LOAD_ATTR_SLOT Load an attribute from an object whose class defines __slots__.

Note how this allows optimizations that complement other optimizations. The LOAD_ATTR_INSTANCE_VALUE works well with the “lazy dictionary” used for many objects.


The LOAD_GLOBAL instruction looks up a name in the global namespace and then, if not present in the global namespace, looks it up in the builtins namespace. In 3.9 the C code for the LOAD_GLOBAL includes code to check to see whether the whole code object should be modified to add a cache, whether either the global or builtins namespace, code to lookup the value in a cache, and fallback code. This makes it complicated and bulky. It also performs many redundant operations even when supposedly optimized.

Using a family of instructions makes the code more maintainable and faster, as each instruction only needs to handle one concern.

Specializations would include:

  • LOAD_GLOBAL_ADAPTIVE would operate like LOAD_ATTR_ADAPTIVE above.
  • LOAD_GLOBAL_MODULE can be specialized for the case where the value is in the globals namespace. After checking that the keys of the namespace have not changed, it can load the value from the stored index.
  • LOAD_GLOBAL_BUILTIN can be specialized for the case where the value is in the builtins namespace. It needs to check that the keys of the global namespace have not been added to, and that the builtins namespace has not changed. Note that we don’t care if the values of the global namespace have changed, just the keys.

See [4] for a full implementation.


This PEP outlines the mechanisms for managing specialization, and does not specify the particular optimizations to be applied. It is likely that details, or even the entire implementation, may change as the code is further developed.


There will be no change to the language, library or API.

The only way that users will be able to detect the presence of the new interpreter is through timing execution, the use of debugging tools, or measuring memory use.


Memory use

An obvious concern with any scheme that performs any sort of caching is “how much more memory does it use?”. The short answer is “not that much”.

Comparing memory use to 3.10

CPython 3.10 used 2 bytes per instruction, until the execution count reached ~2000 when it allocates another byte per instruction and 32 bytes per instruction with a cache (LOAD_GLOBAL and LOAD_ATTR).

The following table shows the additional bytes per instruction to support the 3.10 opcache or the proposed adaptive interpreter, on a 64 bit machine.

Version 3.10 cold 3.10 hot 3.11
Specialised 0% ~15% ~25%
code 2 2 2
opcache_map 0 1 0
opcache/data 0 4.8 4
Total 2 7.8 6

3.10 cold is before the code has reached the ~2000 limit. 3.10 hot shows the cache use once the threshold is reached.

The relative memory use depends on how much code is “hot” enough to trigger creation of the cache in 3.10. The break even point, where the memory used by 3.10 is the same as for 3.11 is ~70%.

It is also worth noting that the actual bytecode is only part of a code object. Code objects also include names, constants and quite a lot of debugging information.

In summary, for most applications where many of the functions are relatively unused, 3.11 will consume more memory than 3.10, but not by much.

Security Implications


Rejected Ideas

By implementing a specializing adaptive interpreter with inline data caches, we are implicitly rejecting many alternative ways to optimize CPython. However, it is worth emphasizing that some ideas, such as just-in-time compilation, have not been rejected, merely deferred.

Storing data caches before the bytecode.

An earlier implementation of this PEP for 3.11 alpha used a different caching scheme as described below:

Quickened instructions will be stored in an array (it is neither necessary not desirable to store them in a Python object) with the same format as the original bytecode. Ancillary data will be stored in a separate array.

Each instruction will use 0 or more data entries. Each instruction within a family must have the same amount of data allocated, although some instructions may not use all of it. Instructions that cannot be specialized, e.g. POP_TOP, do not need any entries. Experiments show that 25% to 30% of instructions can be usefully specialized. Different families will need different amounts of data, but most need 2 entries (16 bytes on a 64 bit machine).

In order to support larger functions than 256 instructions, we compute the offset of the first data entry for instructions as (instruction offset)//2 + (quickened operand).

Compared to the opcache in Python 3.10, this design:

  • is faster; it requires no memory reads to compute the offset. 3.10 requires two reads, which are dependent.
  • uses much less memory, as the data can be different sizes for different instruction families, and doesn’t need an additional array of offsets. can support much larger functions, up to about 5000 instructions per function. 3.10 can support about 1000.

We rejected this scheme as the inline cache approach is both faster and simpler.


[1] (1, 2)
The construction of high-performance virtual machines for dynamic languages, Mark Shannon 2010.
Dynamic Interpretation for Dynamic Scripting Languages
Inline Caching meets Quickening
The adaptive and specialized instructions are implemented in

The optimizations are implemented in:


Last modified: 2022-03-25 13:09:22 GMT